ISO 27830-2008 金属和其他无机涂层.专用金属和无机涂层用指南

作者:标准资料网 时间:2024-05-06 15:17:05   浏览:8208   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:Metallicandotherinorganiccoatings-Guidelinesforspecifyingmetallicandinorganiccoatings
【原文标准名称】:金属和其他无机涂层.专用金属和无机涂层用指南
【标准号】:ISO27830-2008
【标准状态】:现行
【国别】:国际
【发布日期】:2008-08
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC107
【标准类型】:()
【标准水平】:()
【中文主题词】:涂层;防腐蚀;电泳涂漆;电解镀层;指导手册;无机物的;金属涂层;金属的;规范(验收);标准化
【英文主题词】:Coatings;Corrosionprotection;Electrocoatings;Electrodepositedcoatings;Guidebooks;Inorganic;Metalcoating;Metalcoatings;Metallic;Specification(approval);Standardization
【摘要】:ThisInternationalStandardspecifiesthetechnicalrequirementsofmetallicandotherinorganiccoatingsinordertodevelopconsistenttechnicalstandardsandestablishesastandardformatfordesignatingthecoatings.ItappliestoInternationalStandardsforelectrodeposited,autocatalyticandvapourdepositedcoatings.DetailedtechnicalrequirementsforindividualcoatingsarenotgiveninthisInternationalStandard,butcanbefoundintheInternationalStandardslistedintheBibliography.ThisInternationalStandarddoesnotapplytothermallysprayedandporcelainenamelcoatings.ThisInternationalStandardisnottobespecifiedintechnicalstandards,productspecifications,contracts,purchaseordersoronengineeringdrawings,asinvokinga"methodofspecifying"inthesedocumentsisnotcontractuallybinding.Themainclausesofacoatingstandardshallbethefollowing:Introduction(optional)1.Scope(mandatory)2.Normativereferences(mandatory)3.Termsanddefinitions(mandatory)4.Informationtobesuppliedtotheelectroplaterorprocessorbythepurchaser(mandatory)5.Designation(mandatory)6.Requirements(mandatory)7.Sampling(mandatory)AnnexesA,B,C...etc.(optional)Bibliography(optional)TheScopeshalldefinethepurposeofthestandardandstatethematerialsandproductstowhichitapplies,alongwithanyknownlimitations.TheScopealsocontainswarningsorcaveatsconcerninghealthandsafetyhazards,internationalandenvironmentalrulesandregulationsinboldfonte.g.:CompliancewiththisInternationalStandarddoesnotofitselfconferimmunityfromlegalobligations.
【中国标准分类号】:A29
【国际标准分类号】:25_220_20;25_220_40
【页数】:19P.;A4
【正文语种】:英语


下载地址: 点击此处下载
基本信息
标准名称:小型植入器械腐蚀敏感性的循环动电位极化标准测试方法
英文名称:Standard test method for conducting cyclic potentiodynamic polarization measurements to determine the corrosion susceptibility of small lmplant devices
中标分类: 医药、卫生、劳动保护 >> 医疗器械 >> 矫形外科、骨科器械
ICS分类:
发布部门:国家食品药品监督管理局
发布日期:2008-10-17
实施日期:2010-01-01
首发日期:
作废日期:
主管部门:国家食品药品监督管理局
提出单位:全国外科植入物和矫形器械标准化技术委员会(SAC/TC 110)
归口单位:全国外科植入物和矫形器械标准化技术委员会(SAC/TC 110)
起草单位:国家食品药品监督管理局天津医疗器械质量监督检验中心
起草人:姜熙、齐宝芬、李沅、马春宝
出版社:中国标准出版社
出版日期:2010-01-01
页数:平装16开/页数:16/字数:20千字
适用范围

本标准规定了小型植入器械腐蚀敏感性的循环动电位极化的标准测试方法。本测试方法利用循环动电位极化评价小型金属植入医疗器械或其部件的腐蚀敏感性。可以用本测试方法评价的器械包括但不限于血管支架、尿道支架、滤器、血管内移植物的支撑部件、心脏封堵器、动脉瘤夹及结扎夹、U型钉等。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB6682 分析实验室用水规格和试验方法
ASTM F1828 尿道支架规范
ASTM G3 腐蚀试验中电化学测量的规范操作
ASTM G5 恒电位和动电位阳极极化参考试验方法
ASTM G15 腐蚀和腐蚀试验的相关术语
ASTM G61 测定铁基、镍基、钴基合金局部腐蚀敏感性的循环动电位极化测试方法

所属分类: 医药 卫生 劳动保护 医疗器械 矫形外科 骨科器械
基本信息
标准名称:V形垫板
中标分类: 机械 >> 工艺装备 >> 组合卡具
替代情况:HB 1238-75
发布日期:1987-04-08
实施日期:1987-07-01
首发日期:1900-01-01
作废日期:1900-01-01
出版日期:1900-01-01
页数:3页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 机械 工艺装备 组合卡具